LED LIGHT STRIPS
KHUN by nelux - Producing your dreams -
LED LIGHT STRIPS, or light-emitting diode strips, are flexible, versatile lighting solutions that have revolutionized the way we illuminate spaces. LED STRIPS consisting of small LED chips mounted on a flexible circuit board, these strips offer a wide range of colors and dynamic lighting effects. LED strips have gained popularity for their energy efficiency, longevity, and the ability to be easily customized to fit various applications.
Ideal for both residential and commercial use, LED strips can be applied to highlight architectural features, create ambient lighting, or add a vibrant touch to interior and exterior spaces. Their flexibility allows them to adapt to curved or uneven surfaces, making them suitable for a diverse range of projects. With the ability to be controlled remotely and programmed for different lighting scenarios, LED strips provide a modern and dynamic lighting solution for today's smart and energy-conscious environments.
GUIDE TO INSTALL LED STRIPS
Nelux step-by-step guide on how to install and set up LED strips.
​
Step 1: Gather Materials
Ensure you have all the necessary materials before starting the installation:
-
LED strips
-
Power supply (correct voltage and wattage)
-
Controller (if applicable)
-
Connectors and cables
-
Mounting clips or adhesive tape
-
Cleaning supplies (to clean the installation surface)
Step 2: Plan Your Layout
Determine where you want to install the LED strips. Consider the length of the strips, the placement of the power supply, and any obstacles or corners where you may need to cut and connect the strips.
Step 3: Clean the Installation Surface
Clean the surface where you plan to attach the LED strips to ensure secure and long-lasting adhesion. This is particularly important for surfaces like cabinets, walls, or furniture.
Step 4: Cut or Extend Strips (if needed)
If your LED strips are too long for the desired area, follow the manufacturer's instructions on how to cut them. If additional length is needed, use appropriate connectors and extension cables.
Step 5: Connect the Strips
Use connectors to link the LED strips together, ensuring a secure and proper connection. Pay attention to the polarity – match the positive (+) and negative (-) terminals on the strips and connectors.
Step 6: Connect to the Controller (if applicable)
If your LED strips come with a controller, connect the strips to the controller according to the provided instructions. Ensure the controller is properly powered.
Step 7: Connect to Power Supply
Connect the LED strips to the power supply, making sure to match the polarity. Plug the power supply into a suitable electrical outlet.
Step 8: Test the Setup
Before permanently attaching the LED strips, test the setup to ensure everything is working correctly. Check for any color discrepancies, flickering, or issues with the controller.
Step 9: Mount the LED Strips
Secure the LED strips in place using mounting clips, adhesive tape, or other suitable methods. Follow any provided guidelines on the best way to secure the strips for your specific installation surface.
Step 10: Enjoy Your Lighting!
Sit back and enjoy the ambiance created by your newly installed LED strips. Experiment with different colors and lighting effects using the controller if applicable.
Additional Tips:
-
Follow any specific instructions provided by the Nelux.
-
Consider using Nelux smart controllers for added functionality, such as remote control or integration with smart home systems.
​
SPECIAL LED STRIPS more information check below catalogs
COMPATIBILITY GUIDE FOR LED STRIPS
Compatibility Information and Integration Guide for LED Strips:
1. Device Compatibility:
-
Smartphones and Tablets:
-
Many Nelux LED strips can be controlled via dedicated mobile apps. Any questions contact us , many of our LED strips are compatible with popular operating systems like iOS and Android.
-
Nelux provides information on how users can download and set up the mobile app to control the LED strips remotely.
-
-
Computers and Laptops:
-
Nelux LED strips can be controlled through computer software. Nelux specifies if there are any system requirements and provides instructions on how to install and use the software.
-
-
Voice Assistants:
-
Some of our LED strips are compatible with voice assistants like Amazon Alexa or Google Assistant. Any questions Nelux explains how users can connect and control the LED strips using voice commands.
-
2. Controller Compatibility:
-
Wi-Fi Controllers:
-
Some Nelux LED strips come with Wi-Fi controllers. Nelux guides how users can connect the controller to their Wi-Fi network and control the lights through a mobile app.
-
-
RF (Radio Frequency) Controllers:
-
If the LED strips use RF controllers, Nelux guides on how to pair the controller with the LED strips and any remote control that may be included.
-
-
Bluetooth Controllers:
-
Nelux guides on how users can pair their smartphones or tablets with Bluetooth controllers.
-
3. Smart Home Systems Integration:
-
Smart Home Hubs:
-
Some Nelux LED strips are compatible with popular smart home hubs (e.g., SmartThings, Hubitat), Nelux provides instructions on how users can integrate them into their existing smart home ecosystems.
-
-
IFTTT (If This Then That):
-
Our LED strips support IFTTT, Nelux guide on how users can create custom automation scenarios by connecting the LED strips with other smart devices and services.
-
-
Home Automation Platforms:
-
For users with more advanced home automation setups, provide information on compatibility with platforms like Home Assistant, OpenHAB, or Node-RED.
-
4. Integration into Existing Setups:
-
Connecting to Existing Lighting Systems:
-
Nelux Guide on how users can integrate the LED strips with their existing lighting setups. TNelux explains how to connect to traditional light switches or dimmer switches.
-
-
Furniture and Decor Integration:
-
Nelux offers creative ideas on how users can incorporate LED strips into their furniture, shelves, or other decor elements.
-
-
Customization with Other Smart Devices:
-
Contact Nelux to explore ways to synchronize LED strip lighting with other smart devices like smart thermostats, door sensors, or motion detectors.
-
​
GUIDE TO LIGHTING EFFECTS AND CUSTOMIZATION WITH LED STRIPS
Nelux provides a quick guide on lighting effects and customization is essential to help customers make the most out of their LED strips.
Here's a comprehensive guide:
​
Quick Guide to Lighting Effects and Customization with LED Strips:
1. Understanding the Basics:
-
Color Spectrum:
-
LED strips can produce a wide range of colors. Include a visual representation of the color wheel.
-
-
Brightness Control:
-
Users can adjust the brightness levels of the LED strips to create the desired ambiance.
-
2. Pre-Programmed Lighting Effects:
-
Static Colors:
-
Users can select a static color that suits their preference, such as warm white, cool white, red, blue, and green.
-
-
Color Changing:
-
Highlight dynamic color-changing effects, where the LED strips smoothly transition between different colors. Users can control the speed of color transitions.
-
-
Pulse and Flash:
-
Pulse and flash effects that add excitement to the lighting. Users can activate and customize these effects.
-
-
Rainbow and Gradient:
-
Showcase rainbow and gradient effects that smoothly shift through the entire color spectrum.
-
3. Music Sync and Sound-Activated Modes:
-
Music Sync:
-
If Clients buy our LED strips to support music synchronization, Nelux provides a guide to users on how to activate this feature, explaining how the lights can react to the beat and rhythm of the music.
-
-
Sound-Activated Modes:
-
Sound-activated modes where the LED strips respond to ambient noise or clapping. Nelux provides tips on adjusting sensitivity levels.
-
4. Customization for Different Moods and Occasions:
-
Relaxation Mode:
-
Nelux suggests calming colors and subtle transitions for a relaxed atmosphere. Nelux provides tips on setting up the lights to unwind after a long day.
-
-
Party Mode:
-
Nelux Recommends vibrant and dynamic color schemes for lively gatherings. Nelux Explains how to use pulsating or flashing effects to enhance the party atmosphere.
-
-
Productivity Mode:
-
Suggest bright, cool-white lighting for a focused and productive workspace. We provide a Guide on adjusting brightness levels to suit the task at hand.
-
-
Romantic Ambiance:
-
Nelux offers warm and soft colors for a romantic setting, providing tips on using slow and smooth color transitions.
-
-
Seasonal Themes:
-
Nelux Encourages users to customize lighting for different seasons or holidays, providing examples such as red and green for Christmas or orange for Halloween.
-
5. Creating Custom Presets:
-
Save and Recall Presets:
-
Users can save their favorite lighting configurations as presets for easy recall. This is especially useful for frequently used setups.
-
-
Personalized Color Palettes:
-
Nelux Encourages users to experiment with creating their color palettes. Providing a guide on adjusting RGB values for precise color selection.
-
6. Tips for Optimizing Customization:
-
Layering Effects:
-
Nelux advises users on layering multiple effects for a more intricate lighting setup, combining a static color with a slow gradient transition.
-
-
Trial and Error:
-
We Emphasize the importance of experimentation, encouraging users to try different combinations of colors and effects to find what suits their preferences best.
-
​
ENERGY EFFICIENCY AND COST SAVINGS
Energy efficiency and cost savings are significant advantages of using NELUX LED strips.
Energy Efficiency and Cost Savings with LED Strips:
1. Low Power Consumption:
-
LED strips are highly energy-efficient, consuming significantly less power compared to traditional lighting sources. This is because LEDs (Light Emitting Diodes) convert a higher percentage of electrical energy into visible light.
2. Longevity and Durability:
-
LED strips have a longer lifespan than traditional lighting options, reducing the frequency of replacements. The extended lifespan not only contributes to environmental sustainability but also reduces the overall cost of ownership.
3. Reduced Heat Emission:
-
Unlike incandescent bulbs, LED strips emit very little heat. Traditional bulbs waste a considerable amount of energy as heat, while LEDs remain cool to the touch. This not only saves energy but also enhances safety and reduces the load on air conditioning systems.
4. Energy-Efficient Lighting Control:
-
LED strips often come with advanced lighting control options, allowing users to adjust brightness levels and choose specific colors. This flexibility enables users to customize their lighting to match their needs, using only the necessary amount of light.
5. Instant On/Off:
-
LED strips achieve full brightness instantly when turned on, unlike some traditional lighting sources that may take a moment to reach their maximum output. This feature eliminates the need for warm-up time and ensures immediate illumination when needed.
6. Dimming Capabilities:
-
LED strips are easily dimmable, providing users with the ability to adjust the light output according to their preferences. Dimming not only enhances ambiance but also contributes to energy savings by reducing power consumption when full brightness is unnecessary.
7. Lower Maintenance Costs:
-
Due to their long lifespan and durability, LED strips require less maintenance and replacement compared to traditional lighting solutions. This reduces the costs associated with purchasing new bulbs and the labor involved in frequent replacements.
8. Cost Savings Over Time:
-
While the initial cost of LED strips may be higher than traditional lighting options, the long-term cost savings in energy bills, reduced maintenance, and replacement costs make them a more economical choice over time.
9. Environmental Impact:
-
LED strips contribute to environmental sustainability by consuming less energy, producing fewer greenhouse gas emissions, and containing no hazardous materials like mercury (found in some traditional bulbs).
10. Government Incentives:
-
In some regions, governments offer incentives or rebates for the adoption of energy-efficient lighting solutions, including LED strips. NELUX recommends to our customers any available programs that could further enhance their cost savings.
​
LOCAL REGULATIONS AND SAFETY GUIDELINES
Understanding and adhering to local regulations and safety guidelines is crucial when installing LED strips. Regulations can vary depending on your location, so it's important to be aware of specific requirements in your area. Here are some general considerations and safety guidelines to keep in mind:
Local Regulations:
-
Electrical Codes:
-
Check local electrical codes and regulations governing the installation of lighting fixtures. Ensure that your LED strip installations comply with these codes to prevent legal issues and ensure safety.
-
-
Permits:
-
In some regions, permits may be required for electrical work or modifications to buildings. Check with local authorities to determine if permits are necessary for your LED strip installations.
-
-
Zoning Regulations:
-
Zoning regulations may dictate the type and placement of lighting fixtures in certain areas. Be aware of any zoning restrictions that could affect the installation of LED strips, especially in commercial or public spaces.
-
Safety Guidelines:
-
Power Supply Ratings:
-
Ensure that the power supply used for the LED strips complies with safety standards and has the appropriate voltage and wattage ratings. This helps prevent electrical issues and ensures the longevity of the LED strips.
-
-
Water and Moisture Resistance:
-
If installing LED strips in areas exposed to water or moisture, use waterproof or water-resistant strips. Follow manufacturer recommendations to maintain the integrity of the strips and prevent electrical hazards.
-
-
Proper Wiring and Connections:
-
Follow best practices for wiring and connections to avoid short circuits, electrical fires, or other hazards. Use quality connectors, and ensure that wires are properly insulated and protected.
-
-
Overloading Circuits:
-
Avoid overloading electrical circuits by calculating the total wattage of connected LED strips. Distribute the load across multiple circuits if necessary and follow electrical code guidelines.
-
-
Fire Safety:
-
Choose LED strips with fire-resistant materials and install them away from flammable materials. Ensure that the strips and associated components do not generate excessive heat during operation.
-
-
Mounting and Securing:
-
Properly mount and secure the LED strips according to manufacturer guidelines. Use appropriate mounting clips, adhesive tapes, or other recommended methods to prevent falls or dislodgment.
-
-
Ventilation:
-
Allow proper ventilation around LED strips, especially if they generate heat. Proper airflow helps prevent overheating and ensures the longevity of the LED strips.
-
-
Emergency Exits and Signs:
-
Ensure that LED strips do not obstruct emergency exits or safety signs. Follow safety regulations related to the placement of lighting fixtures in emergency exit routes.
-
-
Accessibility Compliance:
-
In commercial or public spaces, be aware of accessibility guidelines. Ensure that LED strip installations do not hinder the movement of individuals with disabilities and comply with accessibility standards.
-
-
Proper Labeling:
-
Label electrical panels and switches clearly to indicate their association with LED strip installations. This enhances safety during maintenance and troubleshooting.
-
​
IMPORTANT: NELUX RECOMMENDS always consult with a qualified electrician or professional installer if you have specific questions or concerns about electrical safety. Additionally, keeping abreast of any updates to local regulations is essential to ensuring compliance with the latest standards.
LED STRIP WARRANTY AND SUPPORT GUIDE
LED Strip Warranty and Support Guide
Warranty Policy:
Product Coverage:
Our warranty covers all KHUN LED strip products purchased directly from NELUX. The warranty extends to the entire LED strip product, including connectors and controllers purchased from Nelux.
Duration:
All LED strip products are covered by a 3-year warranty from the date of purchase. The warranty period begins on the day the product is completely paid.
Conditions for Validity:
To qualify for warranty service, LED strips must be installed and used according to the provided instructions. Any modifications, improper installation, or use outside of specified parameters may void the warranty.
Exclusions:
The warranty does not cover damages caused by accidents, misuse, abuse, neglect, or unauthorized modifications. Additionally, any damage resulting from acts of nature (fire, flood, etc.) is not covered.
After-Sales Support Services:
Contact Information:
For after-sales support, please reach out to our customer support team:
-
Email: salesnelux@gmail.com
-
Phone: +852 28600042
-
Office Hours: Hong Kong time 9 am to 6 pm
Customer Support System:
Our dedicated customer support team is available to assist you. You can contact us through email, phone, or WhatsApp.
Response Time:
We aim to acknowledge receipt of your inquiry within 24 hours. The resolution time will depend on the complexity of the issue and will be communicated to you during the support process.
How to Initiate a Warranty Claim:
Submission Process:
To initiate a warranty claim, please visit our Warranty Claims Page on our website or contact our customer support team via email or phone.
Required Information:
When making a warranty claim, please provide the following information:
-
Proof of purchase (receipt or order confirmation).
-
Product serial number or reference (if applicable).
-
A detailed description of the issue.
​
Resolution Process:
Evaluation and Diagnosis:
Our support team will evaluate and diagnose the reported issue based on the information provided. In some cases, additional troubleshooting steps or images may be requested.
Repair or Replacement:
Once the issue is diagnosed, products will either be repaired or replaced based on the warranty terms. Estimated timelines will be communicated during the resolution process.
Communication Throughout:
We are committed to keeping you informed at every step of the resolution process. You will receive regular updates on the status of your warranty claim.
Customer Feedback and Improvement:
Feedback Mechanism:
We value your feedback! After your support experience, you may receive a survey to provide feedback on our service. Alternatively, you can leave a review on our website.
Continuous Improvement:
Client feedback is essential to Nelux's continuous improvement efforts. We strive to enhance our support services based on your suggestions and experiences.
​
Dear Valued Customer,
Thank you for considering Nelux for your product needs. Your satisfaction is our top priority, and we are here to assist you in every step of the way. Whether you have inquiries about our products, need assistance with customization options, or are interested in receiving a price quote, our dedicated team is ready to help.
Additionally, we understand the importance of timely responses, especially when it comes to pricing inquiries. If you have a specific product or customization in mind and would like to receive a quick and accurate price quote, we encourage you to use our convenient Price Request form.
Rest assured that upon receiving your price request, our dedicated team will work diligently to provide you with a detailed and competitive quote.
Thank you for considering Nelux. We value your business and look forward to the opportunity to serve you. If you have any further questions or require additional assistance, please do not hesitate to contact us.
​
DOWNLOAD CATALOG 2024
Presentiamo il nostro catalogo ILLUMINAZIONE LINEARE 2024.: illumina il tuo mondo con stile e precisione
Siamo lieti di presentare l'ultima innovazione nel design dell'illuminazione: il nostro catalogo ILLUMINAZIONE LINEARE 2024.. Abbiamo selezionato una collezione che va oltre l'illuminazione; È una sinfonia di QUALITÀ e DESIGN.
Preparati a esplorare una fusione di forma e funzione con i nostri più recenti progetti di illuminazione lineare che puoi vedere sul mercato. Il nostro catalogo di illuminazione lineare 2024 presenta molteplici possibilità per i tuoi progetti all'avanguardia, integrandosi perfettamente in qualsiasi spazio, elevando l'estetica e fornendo soluzioni di illuminazione precise e personalizzate.
Comprendiamo che ogni spazio è unico. Ecco perché i nostri sistemi di illuminazione lineare sono progettati pensando alla flessibilità. I nostri prodotti consentono di realizzare installazioni a binario, a superficie, ad incasso e a sospensione per qualsiasi progetto, grande o piccolo.
Ispirazione per ogni progetto: che tu sia un designer d'interni, un architetto o un proprietario di casa con una visione, il nostro catalogo è molto interessante per i tuoi progetti.
​
Scarica il nostro catalogo oggi. Grazie per aver scelto Nelux -produrre i tuoi sogni-.
​